where are you based, mate?
This is a discussion on 308 steyr ssg loads please within the Cartridges & Calibers forums, part of the Sniping Related category; Hi guys I shoot a 308 steyr ssg p1 Im looking for load data for hornady 155g Amax bullets I live in the UK so ...
Hi guys I shoot a 308 steyr ssg p1 Im looking for load data for hornady 155g Amax bullets I live in the UK so powders are limited at the moment on my shelf Iv got vitavouri n140 n160 and a tub of varget.
Any help would be appreciated. Iv also got some 168g sierra match kings.
I am limited to 1ooyds 200yds or 300yd ranges any shooting over these distances would be highly unlikely due to the ranges I have access to.
Although I would love to have a go at 600 or a 1000yds just once in my life.
Varget should be a good powder to work with. All rifles, even those with the same manufacturer, have a bit different need, so you should work a load up for best results. Here's a site with a pretty broad scope of loads of different bullet, powder , primer & brass loads . There are loads for both Varget and N140 listed.
Scotsgun I live in the North East of England in Cleveland its not far from Newcastle most of my shooting is done on millitary ranges at Catteric Garrison.
Jeffdorr thanks for the link. Ill check it out.
Settled on Honady 155G a MAX for my first outing.
43and1/10grain vitavouri N140.
Shot of the bipod with a rear bag at 100meters all went into a inch black square.
IM a happy bunny got a starting point.