12GA FH- Hairy Blaster- - Page 33

12GA FH- Hairy Blaster-

This is a discussion on 12GA FH- Hairy Blaster- within the DIY forums, part of the Sniping Related category; And have got 460 HSM specs setup, the impetus for that is some asking about one and new great line of 458 bullets CEB now ...

Page 33 of 33 FirstFirst ... 23313233
Results 321 to 323 of 323
  1. #321
    Senior Member
    Join Date
    Jul 2008
    Location
    Brinton, MI
    Posts
    375
    And have got 460 HSM specs setup, the impetus for that is some
    asking about one and new great line of 458 bullets CEB now has.

    It will hold more powder than the 416 HSM and will get
    a 572 gr as fast as 416 HSM gets a 475gr.....Ed..
    Ed Hubel

  2. #322
    Senior Member
    Join Date
    Jul 2008
    Location
    Brinton, MI
    Posts
    375
    The guys that did the super accurate 416 HE did another
    416 HE that has an 8" longer 42 inch K&P barrel..


    Used a Stiller action and same load with 475 gr bullet, as in
    first gun and and gained about 200 fps with good accuracy.
    3065 fps. Tested 2 groups of 3 and less than 1/2 min moa.

    And loads they used are not the highest speed loads
    the cartridge is capable of....Here is print with specs for
    the 416 HE reamer chamber ....Ed....


    Ed Hubel

  3. #323
    Senior Member
    Join Date
    Jul 2008
    Location
    Brinton, MI
    Posts
    375
    More about he guys that did the accurate 416 HE, they did a
    416 HE that has an 8" longer 42 inch K&P barrel..


    Used longer barrel and the same load with 475 gr bullet, as used
    in the first gun and and gained about 200 fps with good accuracy,.
    3065 fps. Tested 2 groups of 3 and less than 1/2 min moa.

    And loads they used are not the highest speed loads
    the cartridge is capable of....Here is picture.......Ed....




    Ed Hubel

Page 33 of 33 FirstFirst ... 23313233

Ads

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Team Blaster at SHOT
    By Rob01 in forum Misc.
    Replies: 1
    Last Post: 01-17-2010, 09:10 AM
  2. Spiders in my 12ga
    By theloss52 in forum Off Topic
    Replies: 4
    Last Post: 03-20-2009, 06:25 AM
  3. Beretta 12ga. chokes and wrench- who needs them?
    By perpetual motion in forum Rifles
    Replies: 3
    Last Post: 02-27-2009, 03:41 PM
  4. 204 Pdog blaster done...
    By 7mmRM in forum Gallery
    Replies: 21
    Last Post: 02-29-2008, 07:11 AM

Search tags for this page

12 ga. fh

,

12 ga. fh 3 3 1/2 in

,

12 gauge fh

,
12 gauge slug mold
,

12ga fh

,

diy 12ga fh

,

diy primer shotgun

,
ed hubel
,

homemade 12 gauge roll crimp

,

homemade 12 gauge roll crimp tool

,

news

,

slug wads

Click on a term to search for related topics.