12GA FH- Hairy Blaster-

12GA FH- Hairy Blaster-

This is a discussion on 12GA FH- Hairy Blaster- within the DIY forums, part of the Sniping Related category; Just visiting here to tell about our 12GA From Hell videos on Youtube, and a little info about our ongoing work. If you have questions ...

Page 1 of 32 12311 ... LastLast
Results 1 to 10 of 319
  1. #1
    Senior Member
    Join Date
    Jul 2008
    Location
    Brinton, MI
    Posts
    367

    12GA FH- Hairy Blaster-

    Just visiting here to tell about our
    12GA From Hell videos on Youtube, and a
    little info about our ongoing work. If you
    have questions please ask. Here is pic of our
    12GA FH cartridge on the right. Ed Hubel

    The videos are called--

    Grandpa's First Shot


    Grandpa's Cannon




    Ed Hubel

  2. #2
    Senior Member the m700 project's Avatar
    Join Date
    Nov 2007
    Location
    Holmdel NJ
    Posts
    2,454
    is that a 3" on the left?

  3. #3
    Senior Member
    Join Date
    Jul 2008
    Location
    Brinton, MI
    Posts
    367
    That is a 2 3/4" on the left. Now our chambers all
    fire shorter plastic and brass cases. Here is pic
    of my Savage 210 12ga bolt action we put on heavy
    barrel and long chamber. Ed

    Ed Hubel

  4. Remove Advertisements
    SniperForums.com
    Advertisements
     

  5. #4
    Senior Member
    Join Date
    Jul 2008
    Location
    Brinton, MI
    Posts
    367
    The first 12GA FH was Robs on AR forum, my Savage was 2nd.
    Here is closeup pic of Rob's 12GA FH, a Borchardt falling block
    action. Real nice. In picture is along brass 12ga case with one
    of Rob's 2000gr bore rider, solid, streamlined slugs. Ed

    Ed Hubel

  6. #5
    Senior Member Slick's Avatar
    Join Date
    Oct 2007
    Location
    The Leftist Coast
    Posts
    850
    This is a "popular subject" for sure... Here's a link to 10 pages of discussion->

    http://forums.handloads.com/forum_po...TID=10192&PN=1

    I like the concept as it's sort of the ".50 BMG of shotguns".
    Politicians and diapers both require frequent changing for the EXACT same reason...

  7. #6

    Join Date
    Jun 2008
    Posts
    81
    Just curious, can you ream any say 3 1/2" chamber to accept long brass? What issues would you have with pressure further down the barrel than the original chamber?
    And lastly where are your cases modified from existing, or custom made?
    Thanks,
    JB

  8. #7
    Senior Member
    Join Date
    Jul 2008
    Location
    Brinton, MI
    Posts
    367
    Any length 12ga chamber will fire plastic or brass
    cases of the same or shorter length. Many 2 3/4 and
    3" chambers have been lengthened to 3.5".
    In my NEF I lengthened 3" to 3. 85" for the long brass
    case we made by putting 12ga size rims on bmg brass.
    Others are getting turned brass cases made by RMC
    I used NEF because it has heavy barrel full length.
    Which is needed due to our slow powder loads with larger
    amounts of powder. And that is reason we also added thick
    barrels to Savage and Borchardt. It is larger amounts of slower
    powders that determine the need for heavy barrels, not
    case length. With factory fast shotgun powder loads most
    of the space in case is wads.Even 3.5". We just replaced that
    with more slower powder. Here is pic of bmg cases with original
    rims turned off, stub threaded, to take the premade 12ga rim
    pieces shown.Also completed, loaded cases shown.
    Also 2nd picture of my NEF I lengthened chamber on,
    added heavy thumbhole stock. It fires any 12ga case made
    no matter the length up to 3.85". Ed



    Ed Hubel

  9. #8
    Super Moderator monteboy84's Avatar
    Join Date
    May 2006
    Location
    Twin Cities, MN
    Posts
    5,509
    You're making my shoulder hurt

    -matt
    Hidden Content
    Ordnance System Designs, Inc.
    Stay tuned for details.

    Be worthy of your freedom and of the sacrifice of those who protect it.

  10. #9

    Join Date
    Jun 2008
    Posts
    81
    Very inovative work sir, have you explored the legality of hunting with this round as a slug gun?
    JB

  11. #10
    Senior Member
    Join Date
    Jul 2008
    Location
    Brinton, MI
    Posts
    367
    It is a legal US 12ga round, as long as the chamber
    fires 12ga cases of same or shorter length.
    The name you give it has no legal standing, like magnum,
    paradox, from hl, high speed, superx,etc. Shotgun
    barrels are marked with gauge and length.
    As for local hunting.Here you can use 2 3/4,3, 3.5, etc
    any length case slug load, paper, brass, plastic, etc, any
    slug, saboted slug, lead slug, jacketed slug, except explosive
    projectiles. Just got to be straight sided 12ga case
    IE, you can't neck down a 40mm case to 12ga bore size
    and make a legal 12ga. As other regular cases wouldn't
    fire in it. Ed
    Ed Hubel

Page 1 of 32 12311 ... LastLast

Ads

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Team Blaster at SHOT
    By Rob01 in forum Misc.
    Replies: 1
    Last Post: 01-17-2010, 08:10 AM
  2. Spiders in my 12ga
    By theloss52 in forum Off Topic
    Replies: 4
    Last Post: 03-20-2009, 05:25 AM
  3. Beretta 12ga. chokes and wrench- who needs them?
    By perpetual motion in forum Rifles
    Replies: 3
    Last Post: 02-27-2009, 02:41 PM
  4. 204 Pdog blaster done...
    By 7mmRM in forum Gallery
    Replies: 21
    Last Post: 02-29-2008, 06:11 AM

Search tags for this page

12 ga. fh

,

12 ga. fh 3 3 1/2 in

,

12 gauge fh

,
12 gauge slug mold
,

12ga fh

,

diy 12ga fh

,

diy primer shotgun

,
ed hubel
,

homemade 12 gauge roll crimp

,

homemade 12 gauge roll crimp tool

,

news

,

slug wads

Click on a term to search for related topics.