View Profile: OLEJOE - Sniper Central - Sniper & Sharpshooter Forums
Tab Content
No Recent Activity
About OLEJOE

Basic Information

Statistics


Total Posts
Total Posts
86
Posts Per Day
0.05
General Information
Last Activity
06-07-2019 07:05 PM
Join Date
03-30-2015
Referrals
0

29 Likes

Page 1 of 2 12 LastLast
  1. 1EyedTanker
    1EyedTanker liked post by OLEJOE On thread : .308 Reloading data only
    That’s some good shooting. 4064 will be my next move if I don’t get the 202 to work. I’ve shot a lot of the Hornady BTHP bullets in my Creedmoor and they work well. I tried the ELD’s in it and I just...
    Liked On: 02-02-2019, 09:04 AM
  2. Martino1
    Martino1 liked post by OLEJOE On thread : .308 Reloading data only
    The RDFs jump pretty good do they? I’ve got a 700P with the 26” 1 in 12 and the throat in it could make a porno.
    Liked On: 10-26-2018, 11:30 AM
  3. straightshooter1
    straightshooter1 liked post by OLEJOE On thread : .308 Reloading data only
    I shot some more this morning with 41.50 grns of Norma 202 with 168 SMK’s and BR2 primers in Lapua brass.020 out of the lands and they are all touching but I believe it will do better. I haven’t...
    Liked On: 10-13-2018, 06:36 PM
  4. cabrown32010
    cabrown32010 liked post by OLEJOE On thread : Savage 11/111 Long Range OR Browning X-Bolt Stalker LR?
    Also, what do you know about budsgunshop? They have the Savage for $650 but it seems fishy to me. Maybe an older model? I've bought 2 Howa's from Buds and have been very happy with both purchases. I...
    Liked On: 02-10-2017, 09:23 PM
  5. Cliffy
    Cliffy liked post by OLEJOE On thread : New howa build
    I got it all together. Trigger, bolt release and put the scope base on without bedding it. Tightened it on the front and there was no movement on the rear so I screwed it down. Put it back in the...
    Liked On: 02-06-2017, 11:50 PM
  6. Hypo
    Hypo liked post by OLEJOE On thread : New howa build
    I got it all together. Trigger, bolt release and put the scope base on without bedding it. Tightened it on the front and there was no movement on the rear so I screwed it down. Put it back in the...
    Liked On: 02-06-2017, 09:43 PM
  7. exsimguy1
    exsimguy1 liked post by OLEJOE On thread : New howa build
    Well I got the barrel on the action. Headspaced, antisiezed and torqued tight. Didn't get the trigger or the bolt put back together yet though. Did get the ejector put back in. My Talley 20 MOA scope...
    Liked On: 02-06-2017, 08:10 AM
  8. Cliffy
    Cliffy liked post by OLEJOE On thread : New howa build
    That's the way it was done. Got the heaters running and the barrel is in the chuck. Been doing some sharpening and aligning. Letting the barrel acclimate to the temperature. Plan to make some chips...
    Liked On: 02-05-2017, 08:46 PM
  9. exsimguy1
    exsimguy1 liked post by OLEJOE On thread : New howa build
    That's the way it was done. Got the heaters running and the barrel is in the chuck. Been doing some sharpening and aligning. Letting the barrel acclimate to the temperature. Plan to make some chips...
    Liked On: 02-04-2017, 08:59 PM
  10. mamalukino
    mamalukino liked post by OLEJOE On thread : New howa build
    15233
    Liked On: 01-29-2017, 07:06 PM
  11. Cliffy
    Cliffy liked post by OLEJOE On thread : New howa build
    It's lathe cut. The other one I cut has a 90 degree crown on it. I wanted to try this one as it seems to be the most popular. I have a special ground bit I used that has a lot of clearance ground in...
    Liked On: 01-28-2017, 09:24 PM
  12. exsimguy1
    exsimguy1 liked post by OLEJOE On thread : New howa build
    It's lathe cut. The other one I cut has a 90 degree crown on it. I wanted to try this one as it seems to be the most popular. I have a special ground bit I used that has a lot of clearance ground in...
    Liked On: 01-28-2017, 09:09 PM
  13. mamalukino
    mamalukino liked post by OLEJOE On thread : New howa build
    15034Here's a pic of the crown. The wavey look is light reflection. Smooth as a babies butt.
    Liked On: 01-26-2017, 10:33 PM
  14. exsimguy1
    exsimguy1 liked post by OLEJOE On thread : New howa build
    15034Here's a pic of the crown. The wavey look is light reflection. Smooth as a babies butt.
    Liked On: 01-25-2017, 06:19 AM
  15. exsimguy1
    exsimguy1 liked post by OLEJOE On thread : New howa build
    I understand what you're saying. The bullet will contact the leade where the reamer has cut and not actually the rifling. I'll have to check my reamer dimensions to see what the distance is from the...
    Liked On: 01-25-2017, 06:19 AM
Page 1 of 2 12 LastLast