Search:

FN PBR .308 20in barrel
Nightforce NXS 3.5-15x50 mil/mil
Nightforce 6-screw 30mm high rings
Harris S-BR 6-9 Bi-pod w/podlock

Think high rings too much, but can probably live with, if I get a...

Springfield Armory Saint
*Non-free floated barrel with K-mod rails
*Magpul AFG2 (angled foregrip)
*Streamlight Protac (not using the pressure switch)
*EoTech EXPS2-0

26481

Just throwing something into the wind here...

If you pour your charge into the case then dump into the scale, is the pile of powder distributed the same as when you dump your charge straight into...

There was no disclaimer on the bag. I also got about 15 rounds of 9mm/45acp in the lot... I have a Lee Universal Decapper and a RCBS swaging die. Both are great investments. Our range is picked...

So I usually cull about 5-10% of my AR fired 5.56 brass, less on once fired, more on the second or third time through. The other day I was at a popular online retailer who also has a walk-in...

Redding Match Grade 3BR Powder Measure Universal Metering Chamber

This is the one I have. I reload VV-140/150, IMR-4064/3031 as stick/extruded powders. Always holds 0.1 grains. The only thing to...

Sound advice.

6mmBR Cartridge Guide

A webpage dedicated to 6mmbr (now hosted at accurateshooter.com).

Scroll down for reloading recipes, but the whole page is a good read.

Welcome back! I was searching your profile literally a week ago and saw you hadn't been on in forever. Good to see an old face back with lots of wisdom to impart.

I remember your response to my...

Agreed, but it's not the longer barrel that gives you more velocity, it is the longer barrel with an appropriate powder that burns for the entire length of the barrel, thus continuing to accelerate...

On barrel length for a .308, consider this article by S.W.A.T. magazine regarding Mike's rifles at TacOps.

Tactical Operations Inc.

Click on "articles" below the main webpage picture and click...

RIP. Enjoy the big shooting range in the sky.

As the title says, is there a tool that checks the alignment on a press, between the ram on the bottom and the threads cut for the die?

My rifle brass, both .223 and .308 come out of the sizing...

There is a thread on these forums:
https://www.sniperforums.com/forum/cartridges-calibers/10405-home-armoury-loading-under-occupation.html

Where madgunsmith describes turning 8mm mauser into .308...

Do any of you use your rifle powder measure instead of the shothell measure to throw charges? I ask because I have a Lee Load All II, and it gives about half a grain of variation it seems, and...

Why aren't Mimes funny? Because some people can tell a joke, some can't...

I am fairly new to reloading, only in the last 2 years, and have only VERY recently started reloading shotgun, so take this with a grain of salt.

Alliant website has recipes using red dot powder...

Thanks for the information everyone.

Well, as a normal progression from getting into rifle and pistol reloading, i've ventured into shotshell reloading, or at least am trying. I went budget first, with a Lee Load All-2 to start, but...

In the tac-ops article, two key things, one it is a custom rifle, precision tolerances, little slop. That will give you different (better in most cases) results than an off the shelf, assebly line...

And as you can see, where one person prefers the hash marks between dots and stadia as more functional and worth extra money, someone else prefers a less cluttered and more simplistic field of view...

My wife had never shot a gun in her life, even when she was in Navy bootcamp. I got into shooting a few years back, and she had no interest. One day, she lost a bet with me, and had to actually shoot...

With both of those kits RCBS has a mail in rebate. If your purchase is over $300, you get $50 back, otherwise, you only get $10 back on a purchase over $50 but under $300. That puts both kits at...

Would this work as an O-give comparator? I used my spare Redding seating plug, put my calipers on it, zero it, then insert a loaded cartridge where, in theory, the bullet seating plug should make...

Thanks for all the feedback. I am shooting out of an AR-15.