Sniper & Sharpshooter Forums banner

21 - 29 of 29 Posts

·
Registered
Joined
·
778 Posts
What kind of luck have you had with impacts after you drop subsonic. Me... not so much...by the way, that windage Mil looks a little low at 1000.
Without a steel plate, grouping looks around 20" ish from what I can tell. They are very consistent. Thats a 5mph wind, the high BC does very well. They transition through transonic very well

Sent from my VS995 using Tapatalk
 

·
Registered
Joined
·
165 Posts
Discussion Starter #22
Cheapest way is just get a good one piece 20 MOA scope mount.. the FX1000 is a good piece of glass unless your just needing better magnification. A 20 MOA mount would give your scope the tilt it needs to reach out that far

Sent from my SM-N975U using Tapatalk
Oh man! If I can get away with a Larue 20 MOA mount for a 2000 yard shot, I’d feel amazing! Maybe I can call them Monday and see what they recommend. That would be such a big bail-out for me. Thank you Ted!!


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
1,280 Posts
I may be wrong but 20moa / 3.6 is about 5.5 MILS. 5.5 plus your scope’s 17 will get you to about 22.5 MILS. If you need 34 MILS you might be a bit shy of your mark with a 20 moa mount. One thing I did with my .22lr is I maxed out the elevation adjustment on the turret then used the tree reticle on my scope to make up the difference on 200yd shots.. It worked well... except for the fact that wind blows a 36gr pill a heck of a lot at 200yds.. slight change in wind and I’d miss the 12”lolly pop.
 

·
Registered
Joined
·
778 Posts
My .308 has a 20moa rail and 20moa mount. I have 27.5 mils in my turret and 10 in the reticle. Next purchase will be a Charlie Tarac micro set to 30mils.

Similar setup on my 22lr, have enough turret on that for 500 yards.
Scope is a Gen 2 Razor 4.5-27
22lr at 400 yards on a 12" plate. Magnetospeed T1000 hit indicator on bottom of target

Sent from my VS995 using Tapatalk
 

·
Registered
Joined
·
165 Posts
Discussion Starter #26
My .308 has a 20moa rail and 20moa mount. I have 27.5 mils in my turret and 10 in the reticle. Next purchase will be a Charlie Tarac micro set to 30mils.

Similar setup on my 22lr, have enough turret on that for 500 yards.
Scope is a Gen 2 Razor 4.5-27
22lr at 400 yards on a 12" plate. Magnetospeed T1000 hit indicator on bottom of target

Sent from my VS995 using Tapatalk
I want that hit Indy!!


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
165 Posts
Discussion Starter #27
My .308 has a 20moa rail and 20moa mount. I have 27.5 mils in my turret and 10 in the reticle. Next purchase will be a Charlie Tarac micro set to 30mils.

Similar setup on my 22lr, have enough turret on that for 500 yards.
Scope is a Gen 2 Razor 4.5-27
22lr at 400 yards on a 12" plate. Magnetospeed T1000 hit indicator on bottom of target

Sent from my VS995 using Tapatalk
Ok, so I just looked. It’s not high priced price of equip. That will be awesome for me. $145 headed out the door! Lol


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
848 Posts
For shooting Extreme Long Range, sometimes you run out of your turret. Then you will have to use the reticle to hold over. Then there's time you even run out of the reticle. That's why they have adjustable scope base. You can raise the entire scope mount to give you additional adjustments. They're bit expensive thou.
 
21 - 29 of 29 Posts
Top