Sniper & Sharpshooter Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
I wasn't paying attention while I was attempting to remove the firing pin on the bolt of my Origin and I rotated the bolt shroud the wrong direction. It now appears to be stuck. I can't get it to budge or rotate back. Any suggestions on how I can get it oriented correctly again?

IMG_20200121_222233 (1).jpg
 

·
Registered
Joined
·
3 Posts
I wasn't paying attention while I was attempting to remove the firing pin on the bolt of my Origin and I rotated the bolt shroud the wrong direction. It now appears to be stuck. I can't get it to budge or rotate back. Any suggestions on how I can get it oriented correctly again?

View attachment 28414
You will need to "cock" the striker and rotate it to the bolt open or cocked position. A vise with soft jaws will work to hold the cocking piece while yo rotate the rest of the bolt
 
1 - 4 of 4 Posts
Top