Sniper & Sharpshooter Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
253 Posts
here's what i can tell you from my experience....i own a G3 style rifle with a Freedom Arms reciever (i don't know who made the guts for it). keeping in mind that this is a carbine style with a brake on the end of it (the barrel is approx 16"-18" long) i get roughly 4 to 5 MOA with it. i haven't been able to do an extreme amount of testing with it, but so far machine gun ammo (which is 147gr FMJBT) grouped the best (closer to 2.5 MOA). other ammo that i've tried so far only included the heavier bullet weights, so i'm not sure how well she'd do with lighter weight hunting bullets. i had an issue with the sights on mine (ran out of elevation adjustment) so i removed the rear sight and put a scope on the integral rail. the brake makes it louder than a sunofagun, but all in all its a fun rifle. something to take to the range and blow some rounds off. definitely not a 300 yard deer rifle. as far as reliability goes, i have had a failure to fire a couple of times. these appeared to have been struck by the firing pin, but didn't go off. it was cheap surplus ammo, and it was only during one session in particular, so i'm guessing that it is the culprit. other than that i haven't had any problems with it other than the brass hitting the guys shooting between me and the far right lane. it tosses them WAY out there.
Thanks,

Brian
 
1 - 1 of 1 Posts
Top