[greenron15]

I would like you to do a review on GA Precision Riflles They make a rifle equal to Tac Op rifles. This constant putting down of any other custon rifle maker but Tac Op is foolish. You can put a stop to it by telling your readers about other fine custom tactical rifles like GA Percision
Ron

 

[greenron15]

You really have never seen or fired one if you belive GA Percision has a sporting barrel on it. As far as a guarantee of 1/4 inch it would depend on the shooter. My Crusader shoots 1/4 inch. Put to a contest of which one shoots the best would depend on the shooter and the day.

 

[Longrange308]

+1 for a GAP rifle review. Maybe the crusader, or the rock

 

[mmontag]

I agree, A GA Precision review

I would like you to do a review on GA Precision Riflles They make a rifle equal to Tac Op rifles. This constant putting down of any other custon rifle maker but Tac Op is foolish. You can put a stop to it by telling your readers about other fine custom tactical rifles like GA Percision
Ron

I agree, I always wanted to see an M24 rifle review between a Remington M24 SWS, a GA Precision M24, and a Texas Brigade Armory M24. A review of those three using the same scope, same lots of ammo, and same conditions would be great! Which is more accurate, which is lowest in price, which one is the best! I know they will all be pretty close but it will be interesting nonetheless.

-Mike

 

[ddd oo7]

I am not knocking GAP. I believe that they make a great rifle. My problem is that my factory R700 shoots better than 1/2 moa. I would be sick if I spent that kind of money on a custom and it only shot 1/2 moa. I realize that the majority of them shoot better, but they are not guaranteed to do so. I realize that the conditions and the shooter have a lot to do with a gun shooting less than 1/2 moa. I also realize that I am capable of less than 1/2 moa (maybe not 1/4 though), but if I spend that kind of money I want to know that my gun is not going to be the limiting factor in my shooting. Like Adam said though-- I wouldn't turn one down. I have shot GAP and they shoot really well. I have not shot a Tac-Ops to compare.

I also would like to see an official "Mel" review of a GAP rifle.

 

[mele]

The GA Precision review is a good idea and we'll get one here and make it happen on snipercentral.com

We already have a Real Remington M24 here, NIB, but doing a comparison between Remmy, GAP, and TBA could be interesting, but initially we'll probably go with a Crusader or similar.

MEL

 

[Widowmaker0001]

The GA Precision review is a good idea and we'll get one here and make it happen on snipercentral.com

We already have a Real Remington M24 here, NIB, but doing a comparison between Remmy, GAP, and TBA could be interesting, but initially we'll probably go with a Crusader or similar.

MEL

Awesome News! can't wait Mel

~Reagan

 

[mmontag]

Thats great! Looking forward to it. I have a feeling that the real M24 will come out on top with the right ammo. I've always liked the Walker trigger design and the Timney 510 is based off of it but without the floating connector, I think it's all one piece as it should be. I've also heard about the X-mark pro trigger and how bad it is. I've seen that the X-mark pro has an adjustment screw in the upper trigger shoe and saw a trigger like that on a photo of someone's GA precision M24, which I thought was kind of strange. All three of them have nice barrels with 5R and twist rates around 1 in 11.25 give or take a .25.

The GA Precision review is a good idea and we'll get one here and make it happen on snipercentral.com

We already have a Real Remington M24 here, NIB, but doing a comparison between Remmy, GAP, and TBA could be interesting, but initially we'll probably go with a Crusader or similar.

MEL

 

[dknight1979]

I had my model 70 done by them and I'm holding 1/2" MOA at 300yards . It's a 300WSM and the put a Krieger barrel on and lap lugs blue print and trued, I'm very happy and would refer anyone to them. I had Dustin Lasiter do the work. I then put a Timney trigger on and a McMillan M40 stock.

Sent from my iPhone using Outdoor Forums

 

[lazy21]

Great rifles built by great guys! I just recently got my 6.5 Creedmoor built by George himself

 

[dknight1979]

How do you like that Steiner scope? I want to up grade but between vortex , night force , Steiner , US Optics. I'm leaning towards the vortex because I live 30 min away from there facility and I can go and look at all of there glass including prototypes. But I saw a gentleman at the range with a Steiner and I did like like it, just not the price tag. 3000$


Sent from my iPhone using Outdoor Forums

 

[TheF***ingNewGuy]

You can find them cheaper but used, I got my old one for about $1500, wish I would have never sold it.

How do you like that Steiner scope? I want to up grade but between vortex , night force , Steiner , US Optics. I'm leaning towards the vortex because I live 30 min away from there facility and I can go and look at all of there glass including prototypes. But I saw a gentleman at the range with a Steiner and I did like like it, just not the price tag. 3000$


Sent from my iPhone using Outdoor Forums

 

[centerpunch7]

I been shooting a GAP rifle that was put together by Moon when he was there and it is a tack driver.Very happy with my experience with them also.

 

[mele]

Old post...but we did review one a while back

GA Precision Gladius - Full Review

MEL

 

[devin88]

How do you like that Steiner scope? I want to up grade but between vortex , night force , Steiner , US Optics. I'm leaning towards the vortex because I live 30 min away from there facility and I can go and look at all of there glass including prototypes. But I saw a gentleman at the range with a Steiner and I did like like it, just not the price tag. 3000$