My new Leopold is not mounting corect and sending my rounds way off to the left to were the windige is all the way over and still short of the target any ideas on how to fix this any one i have tried all that i know to do
first take everything apart, make sure the base is solid, put fingernail polish on the screws.
next align the rings and lap them, use a alignment tool or 2 - 1 inch rods/30mm if you have a 30mm scope,
check all screws.
once lapped and aligned and still have a problem try getting a base that has windage adjustments. http://www.midwayusa.com/mediasvr.dll/i ... mid=753744
I lined up the Rings already the rear ring has a windge nuts i moved the rear way over once and tured the front also but it was still off Im thinking of changing to a rail mount for it instead of the rings I would like to find a swan arms rail system if some one knows the model to mount on a Rimington 700 vs model i have only used one on an M-14