Sniper & Sharpshooter Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
11 Posts
Thank you, sir, for the information. This was the strangest weapon I have ever seen. As I mentioned before it came with a HiLux M82G2 scope made for a M1A3 with the mount designed only for those top ejector weapons. The HiLux is a really good scope, so I am mounting it on another weapon. Stupid me went and bought some .284 Win thinking that was the round for this rifle only to find out the cartridge was longer than the 6mm x .284 so now I have 120 rounds of it with no weapon to shoot it. I will pursue wildcatters from your helpful link and see what happens. The .284 Win that I purchased was also exceedingly hard to find and expensive. I would offer a 2 for 1 swap for some 6mm x .284 from a wildcatter and see what comes of it.
You might try the Long Range Shooters forum these guys live for wildcat rifles
 

·
Registered
Joined
·
11 Posts
Gunn, I have searched the web and there are so many long-range shooting forums it makes my head spin. If you know the link for the one you mentioned, I would greatly appreciate it if you would send it to me. It sounds like it is exactly the one I need. Thank you.
The name is actually Long Range hunting I think before I put LR Shooting I'll start a thread about your rifle, I do know that there are companies that will make reloading dies but they are expensive.
 

·
Registered
Joined
·
11 Posts
Gunn, I have searched the web and there are so many long-range shooting forums it makes my head spin. If you know the link for the one you mentioned, I would greatly appreciate it if you would send it to me. It sounds like it is exactly the one I need. Thank you.
Gunn, I have searched the web and there are so many long-range shooting forums it makes my head spin. If you know the link for the one you mentioned, I would greatly appreciate it if you would send it to me. It sounds like it is exactly the one I need. Thank you.
I googled it and there are several threads on this round. Chuck Hawks did an article on it. Also from what I can tell the best way to go brass is to get a full length sizing die and then use 6.5x284 norma brass run it threw there then trim to length, I also saw loading data on your round too
 
1 - 3 of 3 Posts
Top