Sniper & Sharpshooter Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Starting to work up some loads for the SCAR17s using a variety of powders and projectiles. My question to the form is sharing experiences with the SCAR product concerning load data related to consistency.

Starting Powders all 10X QTY. @ 40gr
IMR4166
IMR 4064
Varget
XBR 8208

Projectiles
Hornady 155 HPBT
Nosler 155 Cust. Comps
Sierra 155 match kings
all press work at the STD 2.800" COAL
 

·
Registered
Joined
·
11 Posts
With my scar is use

155 smk
45.5 4895
Cci primer

155 nosler
43.5 tac
Cci primer

155 nosler
43.7 8208
Cci primer

All loads are under 1 inch at 100 with yhm resonator on and are traveling 2650 without can. With can is obviously more. I do have the smallest gas jet to reduce recoil and so it doesnt break its self while suppressed since the scar is stupidly over gassed.
 
1 - 2 of 2 Posts
Top