Sniper & Sharpshooter Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Does any here know if the tac a1 and CTR actions are interchangeable? I have a 16" tac a1 in 308. I am mulling over the idea of buying a 20" stainless CTR with the intention of putting it in the tac a1 chassis and putting the 16" in the CTR stock. I will be suppressing both, so I think the 16" will be handy in the standard stock in the woods and just use the 20" tac a1 on the bench. Thank you in advance for the help.
 

·
Registered
Joined
·
4 Posts
Hi there.
They are interchangeable for sure. Only issue lies in removing the rail off the Tac A1. It is a very thick rail for the reason the handguard fixes to it. I have heard some people got it removed.. but its not easy.

You can buy a 20 moa rail for a Tac A1 also. They are probably around $160 plus.

Other than that its all pretty std. The firend pulls off the 'barrel nut' remove the 2x screws holding the 'barrel nut'. Take 2x action screws out the bottom and you're done!

Chz mate
 
1 - 4 of 4 Posts
Top